There are many designs of car sub woofer being manufactured by the kicker. The best way to place a sub woofer is to place it within a box. The closed box acts as a sturdy as well as a low resonance chamber. This makes sure that the sound coming out from the woofer is well shaped. Due to the presence of the box, the efficiency of the woofer increases to a greater extent. Doing this will also increase the power of the output sound. But how to make a kicker sub woofer box?

But we need to understand the maximum efficiency is possible only if the sub woofers are kept properly inside a box. In this article we will not only learn to make the box but also discuss the importance of the box to proper functioning of the sub woofer.

I 14 into 14 square is cut out of the medium density fiber board. Then another one similar to the previous one is cut out. These two squares will act as the front and back sides of the closed box. Now two more pieces are cut in the medium density fiber board with the dimensions 12 and 14 inches. These two pieces are used as the side portion of the box. Similarly for the top and bottom two pieces of dimensions 12 by 12 inches is cut out from the medium density fiberboard. Now as we have the parts, it can be assembled together to form the box.

Though the steps involved in doing this job of creating kicker sub woofer looks little complicated it is definitely possible to do it on our own by following the steps outlined clearly in this article. The things that should be kept ready are fiber board which has neither less nor higher density, screws and glues of wood, saw which is circular in shape, drills , speaker wire , terminal cup and finally jig saw.

Then the top panel, bottom panel and side ones are arranged together in such a way to form a rectangle. The panels are made to bind with each other with the help of screws and glue. The panels are placed in such a way that the dimension measured is 14*14 in inches.

After finishing the cutting work next step is assembling. Be patient in joining all cut out pieces in proper order such that they look similar to a box with openings at the front and rear ends. The attachment of pieces is done such that they neatly overlap with other . For this we should take the help of glue and screws of wood.

In this step a hole is created in the back portion of the box for fixing the terminal cup. This hole should also be done in the same way as the hole in front was made. Here also the terminal cup is used to mark the portions to be removed.

After doing this, its time to use glue and screw to paste the back and front pieces cut out from fiber board already. To complete this box the next step would be to connect the wire of the speaker to the terminal cup. The wire is fixed firmly in the cup with the help of wood screws. The last step is to connect the terminals on sub woofer with the wires of speakers of free end. Once again we use screws for mounting the woofer firmly into our newly created special box. Thus we have learn t How to Make a Kicker Sub woofer Box by following the step by step procedure along with its importance.

Looking to find the best deal on Auto Hifi, then visit www.powernetshop.at to find the best advice on Car audio for you. Get a totally unique version of this article from our article submission service